Hello,
Sur du Supermicro (carte mère X11DPU)
dmidecode -t system # dmidecode 3.1 Scanning /dev/mem for entry point. SMBIOS 3.1.1 present.
Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Supermicro Product Name: SYS-1029U-TRTP Version: 0123456789 Serial Number: S264285X7909166 UUID: 00000000-0000-0000-0000-0CC47AF434A0 Wake-up Type: Power Switch SKU Number: To be filled by O.E.M. Family: To be filled by O.E.M.
Handle 0x000B, DMI type 32, 20 bytes System Boot Information Status: No errors detected
Handle 0x0015, DMI type 15, 73 bytes System Event Log Area Length: 65535 bytes Header Start Offset: 0x0000 Header Length: 16 bytes Data Start Offset: 0x0010 Access Method: Memory-mapped physical 32-bit address Access Address: 0xFF110000 Status: Valid, Not Full Change Token: 0x00000001 Header Format: Type 1 Supported Log Type Descriptors: 25 Descriptor 1: Single-bit ECC memory error Data Format 1: Multiple-event handle Descriptor 2: Multi-bit ECC memory error Data Format 2: Multiple-event handle Descriptor 3: Parity memory error Data Format 3: None Descriptor 4: Bus timeout Data Format 4: None Descriptor 5: I/O channel block Data Format 5: None Descriptor 6: Software NMI Data Format 6: None Descriptor 7: POST memory resize Data Format 7: None Descriptor 8: POST error Data Format 8: POST results bitmap Descriptor 9: PCI parity error Data Format 9: Multiple-event handle Descriptor 10: PCI system error Data Format 10: Multiple-event handle Descriptor 11: CPU failure Data Format 11: None Descriptor 12: EISA failsafe timer timeout Data Format 12: None Descriptor 13: Correctable memory log disabled Data Format 13: None Descriptor 14: Logging disabled Data Format 14: None Descriptor 15: System limit exceeded Data Format 15: None Descriptor 16: Asynchronous hardware timer expired Data Format 16: None Descriptor 17: System configuration information Data Format 17: None Descriptor 18: Hard disk information Data Format 18: None Descriptor 19: System reconfigured Data Format 19: None Descriptor 20: Uncorrectable CPU-complex error Data Format 20: None Descriptor 21: Log area reset/cleared Data Format 21: None Descriptor 22: System boot Data Format 22: None Descriptor 23: End of log Data Format 23: None Descriptor 24: OEM-specific Data Format 24: OEM-specific Descriptor 25: OEM-specific Data Format 25: OEM-specific
dmidecode -t 39 # dmidecode 3.1 Scanning /dev/mem for entry point. SMBIOS 3.1.1 present.
Handle 0x000C, DMI type 39, 22 bytes System Power Supply Power Unit Group: 1 Location: PSU1 Name: PWS-751P-1R Manufacturer: SUPERMICRO Serial Number: P751PCH10A00840 Asset Tag: N/A Model Part Number: PWS-751P-1R Revision: 1.1 Max Power Capacity: 750 W Status: Present, OK Type: Switching Input Voltage Range Switching: Auto-switch Plugged: Yes Hot Replaceable: No
Handle 0x000D, DMI type 39, 22 bytes System Power Supply Power Unit Group: 2 Location: PSU2 Name: PWS-751P-1R Manufacturer: SUPERMICRO Serial Number: P751PCH10A00839 Asset Tag: N/A Model Part Number: PWS-751P-1R Revision: 1.1 Max Power Capacity: 750 W Status: Present, OK Type: Switching Input Voltage Range Switching: Auto-switch Plugged: Yes Hot Replaceable: No
Sur ces alims, elles sont "Hot Replaceable"...
/Xavier (PS: le dmidecode est sur un FreeBSD 11.1-p8).