----- Mail original -----
MegaCLI n'affiche rien, même sur le serveur A :
Euh... Tu es sûr que ce sont des PERC 5i ?
[root@unserveur ~]# /opt/MegaRAID/MegaCli/MegaCli -AdpGetProp BgiRate -aAll
Adapter 0: BGI Rate = 30%
Exit Code: 0x00
[root@unserveur ~]# /opt/MegaRAID/MegaCli/MegaCli -LDinfo -Lall -aAll
Adapter 0 -- Virtual Drive Information: Virtual Disk: 0 (Target Id: 0) Name:raid10 RAID Level: Primary-1, Secondary-3, RAID Level Qualifier-0 Size:4.091 TB State: Optimal Stripe Size: 64 KB Number Of Drives per span:2 Span Depth:3 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Encryption Type: None
Exit Code: 0x00